Triplett TEV300 Electric Vehicle Charger Test Kit

Triplett TEV300 Electric Vehicle Charger Test Kit
Triplett TEV300 Electric Vehicle Charger Test Kit
Triplett TEV300 Electric Vehicle Charger Test Kit

Triplett TEV300 Electric Vehicle Charger Test Kit

P/N: 43330

he Triplett Model TEV300 Electric Vehicle Charger Test Kit provides fundamental wiring testing for EV charging systems with LED GO/NO GO that indicates the status of the charger output socket.

Triplett WireMaster Mapper 8-Way Wire & Cable Mapping Kit

An LED indication chart provides simple socket inspection conditions and does not require a vehicle connected to it. The Proximity Pilot (PP) State (Cable Simulation) simulates 20A current capability between PP and PE conductors.

Learn more

$240.00

Already In Wishlist Add to Wishlist Add to WishlistAlready In Wishlist
Add to Wishlist
Categories: ,

A built-in Control Pilot (CP) State (Vehicle Simulation Switch) can simulate vehicle states with different resistances connected between CP and PE conductors. CP Error “E” simulates the behavior of the station when there is an established short circuit between CP and PE. Complies with EMC Directive (2014/30/EU), the Low Voltage Directive (2014/35/EU), and EN61010-1 standards.

  • Provides fundamental wiring testing for EV charging systems with LED GO/NO GO indication
  • Indicates the status of the charger output socket (vehicle side)
  • LED Indication and Chart Provides simple socket inspection conditions
  • Proximity Pilot (PP) State (Cable Simulation) – Simulates 20A current capability between PP and PE conductors
  • Built-In Control Pilot (CP) State (Vehicle Simulation Switch – Different vehicle states can be simulated: Vehicle states are simulated with different resistances connected between CP and PE conductors
  • CP Error “E” simulation: Simulate the behavior of the station when there is an established short circuit between CP and PE
  • Complies with EMC Directive (2014/30/EU), the Low Voltage Directive (2014/35/EU), and EN61010-1 standards
  • Includes: (1) IEC62196-2 Type 1 female to male adaptor/converter and pouch case

 

Specs & Features

Highlights

  • LAN / Network Cable Tests – Cable Diagram Wire Map, Pass/Fail, Delay, Skew, Ohms
  • Speed Detection – Displays the 10/100/1000 capabilities of any active port (computer, switch, VoIP, access point).
  • Cable Length Test – Indicates cable length, distance to open or short.
  • Return Loss Quality Tests – Tests for load mismatches that affect the wire’s power and data transfer capability.
  • PoE Testing – Detect PoE Voltage and display its amplitude and location on the cable (midspan, endspan or both).
  • Store and Print up to 250 Reports on all cable types.
  • Wall Jack ID – Smart Remotes allow Test & ID in one pass, RJ45 & Coax.
  • Speaker Popper – Locate and identify speakers by audibly “popping” them.
  • Port Blink Cable Detection – Locate cable connection to a switch port by blinking the switch’s Link LED.
  • Test RJ45, Coax and RJ11 Cables for faults.
  • Tone Generator – Send a tone from one end and detect it on the far end (tone probe required).
  • Alert LEDs (Links and Volts) – Two LED’s quickly alert you to an active switch connection or voltage on the line.
  • CCTV / Vpp (Peak to peak voltage) – CCTV systems require a minimum of 1 Vpp to DVR. Measure and display the Vpp of video signals.
  • Phone – Detect central office telephone connections. Display voltage and cable location (up to 4 phones).
  • Loaded Battery Test – Reliably test alarm and security system backup batteries with a load test.
  • Store and print with included LVPRO Manager Software
  • Includes 8 Smart Remotes for Cable ID and multiple drop testing.
Weight 2 lbs

  • TEV300 Electric Vehicle Charge Tester
  • (1) IEC62196-2 Type 1 female to male adaptor/converter
  • Pouch case